Programming 5-Digit Codes RCA Universal Remote Codes (Guide)

Configuring a television remote without the correct code can be frustrating. Some TVs have four-digit codes, while others have five-digit codes; guessing the Code is comparable to attempting to predict the winning lottery numbers. Fortunately, you can rapidly narrow down your options.

This article provides comprehensive information on the RCA Universal remote control, including its operation, programming, and 4-digit and 5-digit RCA codes.

WHAT IS A UNIVERSAL REMOTE FROM RCA?

The RCA Universal is, in truth, a magical remote. It can configure multiple devices simultaneously. Therefore, you only need a few remote controls for your home theater. Typically, each brand and device comes with its own remote and cannot be controlled by another remote.

Assume you have a Smart TV, Projector, Soundbar, Speakers, DVD, and other devices in your home theater. You must seek and retrieve a new remote whenever you want to control one of the devices.

Maintaining an excessive number of remotes is not only tricky but also aggravating. First, you must replace their batteries and store them in a secure location.

However, remote controls are among the most misplaced items. Therefore, if you lose your TV remote, you will miss your favorite program. The RCA remote is the only remedy to these issues.

This single remote controls a variety of devices. Eliminate all other remotes from your home theater and replace them with the RCA remote.

Because RCA is a highly intelligent and sophisticated remote with all function controls. Numerous manufacturers produce RCA remotes.

3 METHODS FOR PROGRAMMING THE RCA UNIVERSAL REMOTE 

There are three methods to program the RCA Universal remote with your device. First, direct code programming is distinct from autonomous programming. The third approach is Code Search. These methodologies will be described in detail. However, before proceeding, consider the following points.

STANDARD CHECKS

Before pairing your RCA remote with your device, you must perform accurate tests.

• Ensure that the batteries in your remote are new and properly positioned.
• The device to which the remote will be programmed is powered on and connected.
• Nothing obstructs your device’s IR sensor.
• Maintain a minimum distance between the remote and the device and aim it in the correct direction.

1. METHOD OF AUTOMATIC PROGRAMMING

Programming the RCA Universal remote with any remote-compatible device is possible. However, we’ll use the television as an illustration.

You will use the same method to program your remote with every other device. Numerous buttons on the RCA remote are inscribed with the respective device’s name.

As an illustration, TV, CBL for cable box, SAT for satellite antenna, AUX for stereo devices, etc. Therefore, you will select the corresponding button during remote programming.

• Turn on your TV, Blu-ray player, DVD player, projector, Speaker, etc. Then, aim the remote control at the device.
• Select the ‘TV’ icon on your RCA Universal remote. The ON/OFF switch on your remote control will begin to glow.
• Next, simultaneously tap and hold the ‘TV’ and ‘ON/OFF’ buttons. Hold the controls until the ON/OFF button flashes on and off.
• The ‘ON/OFF’ button’s light will go out briefly. It will illuminate again in a few seconds. Now, let go of both keys.
• Find and press the ‘Play’ button once on your RCA Universal remote. Within 5 seconds, the television will shut off.
• If it does not turn off, press the “Play” button every five seconds until the TV turns off.
• The next step is to select the Stop button, which will save the remote’s programming information.
• By following the steps above precisely, you can auto-program your RCA remote with any device.

Note: even though configuring your remote is not particularly difficult, erroneous actions can land you in hot water.

You histogram the remote if you do not meticulously follow the correct action of the tablet buttons. If this occurs, remove the batteries from your remote and replace them after a few seconds. Then, restart the process from the beginning.

2. THE DIRECT CODE METHOD OF PROGRAMMING

This technique is simple and quick. Because a 4- or 5-digit Code is required when programming your RCA remote with a device. This Code is unique to each brand and device.

The RCA remote has a manual containing the codes for all compatible devices. However, the majority of people toss away or misplace such guides.

You can still obtain the Codes for your devices, however. This article will provide a compendium of all Device Codes. Follow these instructions to program the Code into your RCA remote;

• Connect your television to a functioning power source and switch it on.
• Press and hold your RCA remote’s ‘TV’ button until the ‘ON/OFF’ button illuminates.
• While holding down the ‘TV’ button, input the brand and model-specific Code for your TV. If the power button on the remote is illuminated at this juncture, the correct Code has been entered.
• Release the ‘TV’ button and transmit various commands (volume and channel changes) to your TV to determine if the remote has been successfully programmed.
• However, if the power button on your RCA remote blinks four times, you have input an invalid code. Repeat step 2 and input another code specific to your television brand.

3. AUTOMATIC CODE SEARCH TECHNIQUE

Automatic ‘Code Search’ button is available on some RCA remotes. Using this option, you can program your remote automatically. Hence, let us learn the procedure;

• Press the power button on the device you wish to program your RCA remote.
• Press and hold the ‘Code Search’ icon while pointing the remote at the device (TV, for example).
• Release the trigger when the power indicator on the RCA remote illuminates.
• Press the TV button on the remote control. If you are programming a device other than a VCR, DVD Player, or Speaker, you must select the button designated for that device.
• Then, press the ON/OFF button on your remote while pointing it at the device. In 3 seconds, the remote will begin transmitting codes to the device.
• Press the ‘Enter’ key as soon as your television powers off. This phase must be completed within three seconds for the remote to store the compatible Code. Otherwise, you will be required to retry the procedure.
• Send a variety of commands to your device to test its functionality. Try the direct Code method if it still needs to be programmed.

LIST OF RCA UNIVERSAL REMOTE CODES WITH 5 DIGITS

Therefore, the list above contains the 4-digit RCA Universal remote codes for all devices, including the TV, DVD Player, and VCR. Some devices, such as contemporary televisions, require 5-digit RCA Universal remote codes for remote programming.

Therefore, you will follow the same pairing method but input the 5-digit Code. This article also contains a list of all 5-digit RCA codes.

• Admiral  10463, 10093
• Aiko 10092
• Anam National  10180, 10055
• Advent  10842, 10817, 10815, 10783, 10761, 11933
• Akai  10672, 10030, 10702, 10812, 11903
• America Action 10180
• AOC 10030
• Apex Digital  10890, 10767, 10765, 10879, 10748
• Albatron 10843, 10700
• Aventura 10171
• Audiovox  10875, 10802, 10623, 10092, 10180, 10451
• Bell & Howell 10154
• Bradford 10180
• Broksonic 10463, 10236
• BenQ 11032
• Candle 10030
• Carver 10054
• Carnivale 10030
• Celera 10765
• Celebrity 10000
• Citizen 10092, 10030, 10060
• Changhong 10765
• Commercial Solutions 10047, 11447
• Clarion 10180
• Craig 10180
• Contec 10180
• Crown 10180
• Crosley 10054
• CXC 10180
• Curtis Mathes 10466, 10166, 10145, 10030, 10702, 10060, 10093, 10451, 10154, 10054, 10047, 11347, 11147
• Dell 11178, 11080
• Daewoo  10672, 10661, 10623, 11661, 10092, 10451
• Denstar 10628
• Denon 10145
• Durabrand  11034, 10171, 10178, 10180, 10463
• Dumont 10017
• Emerson TV  11963, 10623, 10171, 10178, 10180, 10463, 10236, 10154
• Electrograph 11755
• Electroband 10000
• Electrohome 10463
• ESA 11963, 10171, 10812
• Envision 10813, 10030
• Funai  11963, 11271, 10171, 10180
• Fisher 10159, 10154
• Futuretech 10180
• Fujitsu 10853, 10809, 10683
• GE  10055, 10178, 10451, 10051, 10047, 11347, 11447
• Go Video 10886
• Gateway 11756, 11755
• GoldStar  10030, 10178
• Gibralter 10030, 10017
• Grunpy 10180
• Hallmark 10178
• Haier 10768, 11034
• Harvard 10180
• Harman/Kardon 10054
• Havermy 10093
• Hello Kitty 10451
• Hisense 10748
• Helios 10865
• Hyundai 10849
• Hitachi 11960, 10151, 10145, 11145
• Hewlett Packard 11502, 11494
• iLo 11990
• Infinity 10054
• Insignia 11963, 11204, 10171, 12002
• Initial 11990
• Inteq 10017
• Jensen 11933, 10817, 10815, 10761
• JBL 10054
• JVC  10731, 10052, 11253
• JCB 10000
• KEC 10180
• KLH 10767, 10765
• KTV 10030, 10180
• Kenwood 10030
• Kost 11262
• Konka 10707, 10628
• Loewe 10136
• LXI  10178, 10156, 10154, 10054, 10047
• LG 10856, 10700, 10178, 11265, 11178, 11758, 11993
• Maxent 11755
• Magnavox  10802, 10386, 10187, 10706, 10030, 10054, 11198, 11454, 11254, 11963, 11990
• Matsushita 10650, 10250
• MGA  10030, 10178, 10150
• Motorola 10055, 10093
• Marantz  10855, 10704, 10030, 10054
• Memorex  10178, 10150, 10463, 10154
• Megapower 10700
• Megatron 10178, 10145
• Multitech 10180
• Mitsubishi  10836, 10178, 10150, 10093, 11250
• Mintek 11990
• Midland  10051, 10017, 10047
• Monivision 10843, 10700
• MTC 10030, 10060
• NTC 10092
• NAD 10178, 10156, 10866
• NEC 11704, 10030
• Nikko 10030, 10178, 10092
• NetTV 11755
• Norcent 10824, 10748
• Optimus 10650, 10250, 10154, 10166,
• Optonica 10165, 10093
• Olevia 11240, 11144, 11331
• Onwa 10180
• Orion 10463, 10236, 11463
• OptomA 10887
• Petters 11523
• Panasonic  11941, 11291, 10650, 10055, 10051, 10250
• Pilot 10030
• Penney  10030, 10178, 10060, 10051, 10156, 10047, 11347
• Philco 10030, 10054
• Pioneer 10679, 10166, 10866
• Philips 10054, 11454, 10690
• Prima 10817, 10815, 10783, 10761, 11933
• Polaroid 11991, 11314, 11523, 11341, 11276, 11262, 10865, 10765
• Portland 10092
• Prism 10051
• Princeton 10717, 10700
• Proscan 10047, 11447, 11347
• Pulsar 10017
• Proton 10466, 10178
• Quasar 10650, 10165, 10055, 10051, 10250
• Runco 10030, 10017
• RadioShack  10030, 10180, 10178, 10165, 10154, 10047
• Realistic  10165, 10030, 10178, 10180, 10154
• RCA 10679, 10090, 10047, 11147, 11447, 11047, 11347, 11958, 11547, 12002
• Sansui 10463
• Sampo 11755, 10030
• Sanyo 10088, 10154, 10159
• Samsung 10814, 10766, 10030, 10178, 10702, 10812, 10060, 11060, 11903
• SSS 10180
• Scott 10180, 10236, 10178
• Scotch 10178
• Sears 10159, 10171, 10178, 10156, 10154, 10054, 10047
• Sheng Chia 10093
• Sharp 10165, 11602, 10386, 10093,
• SigneT 11262
• Sony  10000, 11100, 11317
• Starlite 10180
• Simpson 10187
• Soundesign  10178, 10180
• Studio Experience 10843
• Squareview 10171
• Supreme 10000
• Superscan 10864, 10093
• SVA 10872, 10871, 10870, 10865, 10768, 10587, 10748
• Syntax 11240, 11144, 11331
• Symphonic 10171, 10180
• Sylvania 11314, 11271, 10171, 11963, 10030, 10054
• Tandy 10093
• Technics 10051, 10250
• TMK 10178
• TNCi 10017
• TVS 10463
• Tatung 11756, 10055
• Techwood 10051
• Techview 10847
• Teknika  10092, 10060, 10150, 10180, 10054
• Telefunken 10702
• Toshiba  10845, 10650, 10060, 10156, 10154, 11265, 11256, 11156, 11704, 11356, 11656
• Victor 10053
• Vector Research 10030
• Vidtech 10178
• Vizio  10885, 11758, 10864, 11756
• Vidikron 10054
• Viewsonic  11578, 11755, 11330, 10885, 10864, 10857
• Waycon 10156
• Wards  10866, 10165, 10030, 10178, 10054, 11156
• White Westinghouse 10623, 10463
• Westinghouse 10889, 10885, 11282, 10890, 11577
• Yamaha 10030
• Zenith 10092, 10017, 10463, 10178, 11265

HOW TO RESET/PROGRAM RCA UNIVERSAL REMOTE CONTROL?

You have learned how to program the RCA Universal remote for multiple devices. However, you may detach your remote from a particular device. This is accomplished by resetting your remote and removing any stored codes.

Go to the remote’s settings and then click “program.” Here, all of the device remote credentials are stored. Press the Code you wish to delete, then repeat the process for additional codes.

You can also thoroughly reset the remote using the following method.

• Remove the batteries from the remote’s battery compartment.
• Now, hold the number one key for sixty seconds.
• After 10 seconds, release the key and install the batteries.
• Repetition is required three or four times.
• Finally, test the functionality of your remote by pressing the ON/OFF button.

FREQUENTLY ASKED QUESTIONS

via Sycamore Net sycamorenet.com/tv/5-digit-...